IC8 Water Chiller

$649.00

The Waterworks IC8 compact, remote chiller is designed for use with drinking fountains, filters, bubblers or glass fillers, thereby enabling any drinking station to supply chilled refreshing water.  It can be installed under a sink or bench, in the ceiling, on a column, an adjacent wall, or in a service area. In fact it’s perfect for virtually any single remote outlet at home or in the office and with the addition of optional filtration, it delivers fresh, clean, chilled water at the touch of a button.  Included with this package is a chrome plated bat style twin handle tap for chilled and ambient water (pictured).   Optional USA made twin under sink water filtration system with metal pressure limiting valve available in the options box below.

Clear
Share
SKU: IC8 Chiller Categories: , Tag:

GENERAL FEATURES
The Waterworks IC8 compact, remote chiller is designed for use with drinking fountains, filters, bubblers or glass fillers, thereby enabling any drinking station to supply chilled refreshing water.  It can be installed under a sink or bench, in the ceiling, on a column, an adjacent wall, or in a service area. In fact it’s perfect for virtually any single remote outlet at home or in the office and with the addition of optional filtration, it delivers fresh, clean, chilled water at the touch of a button.  Included with this package is a chrome plated bat style twin handle tap for chilled and ambient water (pictured).   Optional USA made twin under sink water filtration system with metal pressure limiting valve available in the options box above.
SPECIFICATIONS
CABINET:
The IC8 cabinet is constructed of special material with with superior heat and corrosion resistance.
CHILLING & STORAGE TANK:
Constructed of stainless steel, it has a volume of 1.9 Litres, is fully insulated and independently tested to withstand over 800psi of static pressure. A drain plug and seal is provided, which is removable for servicing. The internal waterlines are 1/4”OD stainless steel and are heliarc welded to eliminate corrosion.
REFRIGERATION SYSTEM:
This fan assisted, static condenser system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts. The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed. The tube on tank style evaporator has six (6) windings around the storage tank for balanced, efficient cooling and the entire system is controlled by an adjustable, (factory pre-set), thermostat.
INSTALLATION:
GENERAL:
The Waterworks IC8 is ideally suited to installation within a relatively confined space such as under the kitchen sink. As a refrigeration appliance however, it relies upon air exchange to function properly and therefore must be provided with adequate ventilation.
PLUMBING CONNECTIONS:
Both the inlet and outlet are recessed, 1/4” stainless steel pipes, suitable for connection to industry standard 1/4” quick connect fittings.
ELECTRICAL CONNECTIONS:
The Waterworks IC8 is Furnished with 1.8 metre GPO power cable and plug. 240volts, 50Hz. Single phase. Running amps – 0.74A. Power consumption – 120W (Cooling Capacity).
COOLING PERFORMANCE: The Waterworks IC8 is capable of cooling approximately 6*LPH (litres per hour) at 10°C. Cooling Speed: From 27°C to 10°C, 21.6 minutes Cooling Capacity: 5.8 litres/hour/10°C ± 2°C Draw Off Capacity: 8 cups below 10°C *Example of Water Temperature of 150ml cups
1st 2nd 3rd 4th 5th 6th 7th 8th 9th 10th 11th 12th
8.6 6.2 6.9 7.7 8.4 8.7 9.1 9.7 10.2 11.0 11.9 12.4
*CRITERIA
Air Temperature, (in immediate vicinity of cooler) 32°C Inlet water temperature, (immediately prior to cooler inlet) 27°C.  All capacities and performance data is based on the assumption that adequate ventilation has been supplied to the unit as per the installation instructions.  Ratings are based on intermittent use under environmental conditions of ARI Standard 1010 (self contained, mechanically refrigerated drinking water coolers) and UL399 (drinking water coolers).
Weights and Dimensions
IC8 WEIGHT WIDTH DEPTH HEIGHT SHIPPING
NETT 12.5kg 210mm 410mm 290mm VOLUME PACKED 13.5kg 230mm 460mm 330mm 0.035M2
WARRANTY
The IC8 water coolers are covered by a 1 Year
Comprehensive Warranty (copy available on request). The
warranty provides comprehensive parts and labour coverage,
for the period of 12 months from the date of original sale.

Weight8 kg
Add a USA made twin under sink water filter system here

,

Reviews

There are no reviews yet.

Be the first to review “IC8 Water Chiller”

Your email address will not be published. Required fields are marked *