The omnipure OMB934 10m-P coarse carbon block replacement cartridge by Omnipure feature the new OmnipureBlock media. This high quality carbon block media is manufactured from raw materials to precise specifications. The OMB-Series is designed to fit in standard 10″ x 2.5 inch filter housings. Ideal for use as a scale inhibitor in the food service industry.
Omnipure OMB934 10M Cartridge Applications
Commercial and Residential Drinking Water Systems
Pre- and Post- R.O. Filtration
6 Months Scale Inhibitor
>98% @ 10 _m
2.50″ O.D. x 1.25″ I.D. x 9.80″ L
Chlorine Reduction >95%
10,000 gallons @ 0.75 GPM
<2.0 psid @ 0.75 GPM
Notes: Chlorine reduction capacity based on laboratory testing conducted using test protocol contained in NSF Standard 42.
Operating Temperature: 40 -125 F
Maximum Operating Pressure: 250 psig
Maximum Differential Pressure: 100 psid
Collapse Pressure: 200 psid
Omnipure OMB934 10M filter elements have been designed to fit most standard household and commercial housings. Your Omnipure representative can verify filter-housing compatibility.
All information provided is based on data believed to be reliable. It should be used for evaluation and verification but not as a warranty.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Activated carbon block filters are not designed to remove bacteria or viruses.
Actual performance results may vary based on the level of organic contaminants in the influent water, changes in pH and upon other conditions that may be encountered during actual use.
General Installation/Operation/Maintenance Requirements
Flush new cartridge for 10 minutes prior to use.
Replace cartridge when rated capacity is reached, or when flow becomes too slow.
Install in compliance with state and local laws and regulations.