0.5 Micron nominal KX MATRIKX® + Pb1 solid carbon block water filter. We recommend this carbon block water filter, NSF certified and approved cartridge. This filter will reduce and remove chlorine/pesticides/chemicals/heavy metals such as lead, Parasites Giardia and cryptosporidium. PB1 matrikx the premier performer. Perfect replacement cartridge for all your water filtration needs. Industry standard 25cm (9 3/4″) size. Also includes electro static wrap on the outside. Suits all 10 inch housings.
MATRIKX® + Pb1 is a powerful, multifunctional filter cartridge for residential and commercial water treatment systems. Heavy Metals Reduction MATRIKX® + Pb1 extruded activated carbon filters reduce soluble lead using an ion-exchange filter medium with high specificity for soluble lead. Particulate filtration is used to intercept insoluble lead-containing particles. Standard 2.50” O.D. x 9.75” L filters will reduce lead,meeting the performance requirements of NSF/ANSI Standard 53protocol for over 2,500 gallons when operating at a flow of 0.75 GPM.Chemical Adsorption MATRIKX® + Pb1 filters offer high levels of chemical reduction in potable drinking water, including chlorine taste and odour .Particulate, Cyst and Turbidity Reduction MATRIKX® + Pb1 filters meet NSF/ANSI Standard 53, Turbidity and Cyst Reduction, including Cryptosporidium, Giardia, Entamoeba and Toxoplasma. Graded-density filtration combined with high dirt capacity extruded activated carbon provide several times greater life than molded filters .MATRIKX® + Pb1 Extruded Activated Carbon Block Filter The Premier Performer• 0.5 μm Nominal Filtration • Rated Flow 0.75 GPM, 2,500 Gallons Life • Lead Reduction Based on NSF/ANSI Standard 53 • Cyst Reduction Based on NSF/ANSI Standard 53 • Turbidity Reduction Based on NSF/ANSI Standard 53 • Outstanding Chlorine Taste and Odour Reduction • Performance Tested and Verified by Independent Laboratory Testing.O.D. x Chlorine Taste & Odour Nominal Lead Initial ΔPPart No. Length Weight Reduction Capacity @ Flow μm Rating Reduction @ Flow06-250-125-975 2.50” x 9.75” 0.85 lbs. >6,000 gal. @ 0.75 GPM 0.5 μm 2,500 gal. @ 0.75 GPM 10.0 psid @ 0.75 GPM06-250-125-20 2.50” x 20” 1.95 lbs. >12,000 gal. @ 1.50 GPM 0.5 μm 5,000 gal. @ 1.50 GPM 10.0 psid @ 1.5 GPM06-425-200-975 4.25” x 9.75” 3.20 lbs. >20,000 gal. @ 2.50 GPM 0.5 μm 8,000 gal. @ 2.50 GPM 7.0 psid @ 2.5 GPM06-425-200-20 4.25” x 20” 6.60 lbs. >42,000 gal. @ 5.00 GPM 0.5 μm 17,000 gal. @ 5.00 GPM 6.5 psid @ 5.0 GPM Technical Specifications KX INDUSTRIES COMPONENT The MATRIKX® + Pb1 is Tested and Certified by NSF International under NSF/ANSI Standard 42 or material requirements only. NSF® © 2009 KX Industries, L.P. All rights reserved. KX, the KX Logo, MATRIKX, and the “GENUINE MATRIKX EXTRUDED CARBON” seal are registered trademarks of KX Industries. EXTRUDED CARBON = EXCEPTIONAL VALUEMATRIKX® + Pb1 filters consist of activated carbon particles fused into a uniform block with enhanced adsorptive capacity and efficiency. MATRIKX® + Pb1 filters flow in a radial (outside-to-inside) direction, providing increased dirt capacity and low pressure drop. Unlike granular activated carbon(GAC) filters, MATRIKX® + Pb1 cartridges will not channel or bypass due to the extreme uniformity of their extruded activated carbon core. Service life of the MATRIKX® + Pb1 filter is greatly extended by a layer of pre filtration medium.• No channeling • No fluidizing No bypassing • Eliminates release of carbon fines • Lowest extractables, pure materials of construction • Maximum service life and resistance to fouling• Graded density filtration design • Manufactured using FDA-compliant materials.